James Bateman (hp-laptop)
58475386ba
ESP32 firmware bridging the 1550 nm MOPA (Koheron CTL200 seed + Agiltron M511 two-stage EDFA) to MQTT/HA as a single device. Telemetry and control for both instruments verified end-to-end: MQTT command -> seed lasing -> booster ramp to 27 dBm (~515 mW) at the documented 2500 mA operating point. - PlatformIO/Arduino project, project-local venv, Makefile upload flow - Koheron ASCII driver on UART2; Agiltron binary 0x55AA driver on UART1 - HA discovery (sensors, binary_sensors, switches, numbers); LWT availability - Static IP, firmware current clamps on seed and booster pump
26 lines
801 B
INI
26 lines
801 B
INI
; PlatformIO project for the Koheron CTL200 -> WiFi/MQTT bridge on ESP32.
|
|
; Board: ESP32-D0WD-V3 (WROOM-32 class) on a CP2102N USB bridge.
|
|
|
|
[env:esp32dev]
|
|
platform = espressif32
|
|
board = esp32dev
|
|
framework = arduino
|
|
|
|
; CP2102N enumerates as /dev/ttyUSB0 on this PC. Override at the command line
|
|
; with `pio run -t upload --upload-port /dev/ttyXXX` if it moves.
|
|
upload_port = /dev/ttyUSB0
|
|
monitor_port = /dev/ttyUSB0
|
|
|
|
; The ESP32's own USB console. The Koheron link is a *separate* hardware UART
|
|
; (see src/main.cpp) so the two never collide.
|
|
monitor_speed = 115200
|
|
upload_speed = 460800
|
|
|
|
; MQTT client. PubSubClient is small and battle-tested.
|
|
lib_deps =
|
|
knolleary/PubSubClient@^2.8
|
|
|
|
; Keep WiFi/MQTT credentials out of source control: see include/secrets.h.
|
|
build_flags =
|
|
-DCORE_DEBUG_LEVEL=3
|