# Butterfly EDFA Rack: snippet to merge into Home Assistant's configuration.yaml.
#
# The rack's sensors, switches and numbers arrive automatically over MQTT
# discovery (the ESP32 firmware publishes homeassistant/.../config topics), so
# this file only adds what discovery cannot: mW optical-power sensors derived
# from the dBm telemetry, and the YAML-mode dashboard registration.
#
# These are top-level keys. Merge them into the existing configuration.yaml on
# the HA host (do not drop its default_config:, frontend:, etc.). If an `mqtt:`
# key already exists there, merge the sensors into it rather than adding a
# second `mqtt:` block.
#
# The internal PDs read ~0.5 dB optimistic, so treat the mW figures as
# indicative, not calibrated.

mqtt:
  sensor:
    - name: "Output Power mW"
      unique_id: butterfly_edfa_rack_out_mw
      state_topic: "lab/laser/butterfly_edfa_rack/amp/output1_power_dbm"
      value_template: "{{ (10 ** (value | float / 10)) | round(1) }}"
      unit_of_measurement: "mW"
      device_class: power
      state_class: measurement
      availability_topic: "lab/laser/butterfly_edfa_rack/availability"
      payload_available: "online"
      payload_not_available: "offline"
      device: { identifiers: ["butterfly_edfa_rack"] }
    # EDFA input PD = seed AFTER the external attenuators (not seed output power).
    - name: "Amp Input Power mW"
      unique_id: butterfly_edfa_rack_ampin_mw
      state_topic: "lab/laser/butterfly_edfa_rack/amp/input_power_dbm"
      value_template: "{{ (10 ** (value | float / 10)) | round(3) }}"
      unit_of_measurement: "mW"
      device_class: power
      state_class: measurement
      availability_topic: "lab/laser/butterfly_edfa_rack/availability"
      payload_available: "online"
      payload_not_available: "offline"
      device: { identifiers: ["butterfly_edfa_rack"] }
    - name: "Pre-amp Power mW"
      unique_id: butterfly_edfa_rack_preamp_mw
      state_topic: "lab/laser/butterfly_edfa_rack/amp/preamp_power_dbm"
      value_template: "{{ (10 ** (value | float / 10)) | round(1) }}"
      unit_of_measurement: "mW"
      device_class: power
      state_class: measurement
      availability_topic: "lab/laser/butterfly_edfa_rack/availability"
      payload_available: "online"
      payload_not_available: "offline"
      device: { identifiers: ["butterfly_edfa_rack"] }

# YAML-mode dashboard registration. Points at ui-lovelace-butterfly.yaml, which
# must sit next to configuration.yaml in HA's /config directory.
lovelace:
  mode: storage
  dashboards:
    butterfly-rack:
      mode: yaml
      title: Butterfly EDFA Rack
      icon: mdi:laser-pointer
      show_in_sidebar: true
      filename: ui-lovelace-butterfly.yaml